Battlefield V’s creators: female characters are ‘here to stay’ | Lrd12 Overload Relay

Where I do agree that it is under rated, as far as I know, Mathias is an electrical engineer. So he should be able to work with mains, and he should also know better.

If the CH-R and Prius hinted at the dynamic leap that Toyota has taken with these new underpinnings, then the Corolla, with all the inherent advantages that come with being lighter, lower and more compact, confirms them, even in this late prototype form.

When it comes to celebrating the arrival of 2019, Clark County’s got everything you can think of, plus a little…

Similarly in the Senate, Republicans’ slim 51-49 majority means that Flake’s defection could be enough to help sink a nomination, or at the very least trigger a tie-breaker. In the case of Farr, Democrats have mounted an aggressive push to block his nomination. Given Flake’s current stance, if they can convince just one more Republican to switch over, they could successfully take it down.

And for example the max continuous current one is “rated” for is 20A, and when I calculated the values without any heat sink, I should be able to run about 700mA. A lot of people forget to do this step before de-rating.

I use a variety of a/c and dc fostek ssrs. I have yet to have a problem, but i use them in circuits where 50% of their rated current is the absolute maximum they will ever see.

The nostalgia for “classic” miniature consoles isn’t ending anytime soon, either: Sony just announced today it’s making its own PlayStation Classic console. The tiny PS1 will come with “20 genre-defining titles,” and it’s set to release this December for $99.99. Also coming this winter is the Sega Mega Drive collection on the Nintendo Switch, and the trailer for it was published today.

When potential EV adopters ask me how long it takes to charge my i3 I don’t have to say “ugh… like 22 hours for a full charge…” Instead I get a much different reaction by saying: “after a normal day of use I plug in my cell phone and my car at the same time and usually the car gets to 100% first… but DC fast charging stations can go substantially faster”

Then there’s the time i went to take apart a computer PSU for the fan, without realising some how I’d left it plugged in (I’d dismantled the entire PC around it, yet left the power lead in?!)

Being in the controller business I’ve been presented more than one friend’s design with insufficient cooling. One friend even mounted his SSR to a decent heat sink then mounted the entire assembly inside his housing with no air circulation. His response was “it will work” and he’s had two SSRs fail that I know of. At least in his case, the steel housing kept the “magic smoke” contained!

It works, but the losses are significantly higher, and if you’re drawing much power you’re going to need heavy, expensive low-voltage sides on both transformers. In a pinch, fine, but if you’re going to be buying them it’s better to spring for a single transformer.

For the person who jumps up and says “coatings insulate the water from the trace”, well no it doesn’t, we are talking about AC voltages and water that has formed over a large trace (even insulated) forms a capacitor that will conduct AC even when you have a DC insulation. Even if it did you then still have the exposed solder pads.