BMW’s iX3 is the company’s first normal-looking all-electric car | Circuit Breaker Parts

Still can’t bring myself to install SSRs on “high current” applications, either. High quality mechanical relays.

Electric blankets have lots of testing to ensure they’re safely insulated from the user. They also don’t get nearly as hot. They also use too much power to economically run from a low voltage PSU.

A clean filter is vital to a well-functioning air conditioner. During the summer it is good to check your filters once a month. If you have pets, leave windows and doors open, or have allergies, you may need to change your filter more often.

I’ve thought about converting my Solidoodle 2 to 120v bed heating for ages now. I think it’s a good idea with a lot of benefits. I’ve been far to lazy to actually do it, however. Maybe one day I’ll get my act together. In the mean time I’ll just sit here and envy other people who have had the initiative to actually do it.

Solar charging becomes more cost effective, however, if you’re tapping into a full-house power system. Sources suggest a properly sized whole-house solar system can pay for itself in around seven years, depending on the size of the installation, local labor rates, component costs, and other variables. The national average for a 6-kW home solar power system is reportedly close to $19,000. Fortunately there’s a 30 percent federal tax credit with no limit available to help offset the costs. Unfortunately, the solar-power credit is scheduled to drop to 26 percent in 2020, 22 percent in 2021, and will be discontinued altogether in 2022.

Thanks to the MOVs’ high energy dissipation, they can be used to suppress lightning and other high-energy transients found in ac power-line applications. They’re equipped to withstand large amounts of energy and divert this potentially destructive energy away from sensitive electronics located downstream. MOVs, which are also used in dc circuits, come in a variety of form factors (Fig. 1).

You really should drop the 110/240 volts statements and use 120/240 volts for residential installs. I don’t think 110 volts has been used since Thomas Edison.

Full-time autofocus. There are several advantages to the use of a translucent mirror in place of a traditional single-lens reflex mirror mechanism. The Sony Alpha A33 uses the design to allow it to simultaneously provide a live view feed with full-time phase detection autofocus. Most of the light is transmitted to the image sensor, while a smaller portion is delivered to the phase detection AF sensor, where it can be used to perform focus adjustments — even during live view, high-speed shooting, and movie recording.

what really matters is whether or not your insurance company will deny your claim. if you have homebrew stuff like this then you are wasting your money on homeowner’s insurance. and of course if your homeowners insurance is invalid then the bank will get a little upset about their mortgage

The Sony A33 ships in the US market from mid-October 2010, with pricing of US$750 for the camera body and an 18-55mm kit lens, or $650 for the body only package.

• Circuit conditions such as the peak voltage and current during the surge event • The MOV continuous operating voltage (should be at 20% above maximum system voltage under normal conditions) • The number of surges the MOV must survive • Acceptable let-through voltage for the protected circuit • Any safety standards with which the circuit must comply

In cases of energy shortfall, we could apply 3% or 6% voltage reduction from our central control, to shed load. (along with asking manufacturers to reduce load, part of their contract) Before real load shedding, switching off supplies. I know. I was a control engineer. Admittedly a few years ago