Charging Your Tesla Model 3 With Just A Wall Outlet | Lrd12 Overload Relay

A hobbyist should not screw with a Triac on house wiring if it will be “permanently” installed in a junction box. Make an adapter that plugs into a socket on the outside so that it is clear it is not a normal outlet. If you have to homebrew something like this use a good relay or contactor with a UR approval. AND read the spec on it thoroughly.

Upgrade the triac and redesign the PCB to be able to safely take a whole 2400W (Australian 240v 10A mains rating) of mains load.

A fun read is the Boeing’s space station power system document that describes the DC power system on the ISS: http://www.boeing.com/assets/pdf/defense-space/space/spacestation/systems/docs/ISS%20Electric%20Power%20System.pdf

And this AC vs DC case when it comes to skin effect, is a reason for why some Data centers use DC distribution, as most server products uses switch mode power supplies and therefor has an internal bridge rectifier.

You just described Capitalism in general ….. Every corporation I worked as an engineer for did those exact same things all the time and that was over 20 years ago before China even became a player …. American automobiles in the early 80’s are an even better example

The Sweep Panorama modes create lengthy panoramic images with a single sweep over the scene, and do a good job of automatically correcting for uneven panning, although they do sometimes show stairstepping in nearby subjects. The 3D variant is particularly unusual, in that it calculates separate left and right-eye views by comparing the positions of subjects as seen by the left and right sides of the lens. The result is saved as a multi-picture object file containing separate left- and right-eye JPEG views of the scene, for viewing on 3D displays.

Google’s Cloud AutoML has been available since January to let users train their own AI tools without any previous coding knowledge. The drag-and-drop tool lets anyone create an image recognition tool, which has a variety of use cases such as categorizing photos of ramen by the shops they came from. You can catch a glimpse of this process in the video above, in which different photos of Waldos are fed into the software.

The comments section of this article is disgusting. Most people throwing rocks at TJ have no idea what they’re talking about, or their concerns are obviously apparent to anyone reading TJ’s post.

PluginCars.com is a trusted and reliable source of information about next-generation automotive trends. If you enjoyed this article, please subscribe below:

The first time I hooked up to HT it was a 32+ inch screen (about 27KV) and it launched me into the air and I landed 4 meters behind where I was sitting. The second time was a 27 inch (about 24KV) and there was a wall about two meters behind me and I was slammed into that so hard that I was bruised in many places.

You like many others here can wallow in their own baseless opinions, meanwhile millions including myself very safely charge up using 120 volts almost every night. I usually use a higher voltage for the BOLT, but the ELR mostly just charges on 120 the same as most VOLTS.

So, you agree with 3mm. Good. A step forward. And because I see you want to use that Industrial standard as example how is your standard looking in case of soldermasked and conformal coated board? What I can say is that I used the 3mm/kV rule and never failed me in 25 years, no board rejected ever…and for the sake of the discution, as you know, when we are under 500V/10A circuits things looks a bit different in PCB Design. We are not sending nobody to the Moon nor switching a 500A Engine starter. It’s a max 300W lighbulb Switch and it’s 99.99% safer than the latest zilions of made in China dimmers and fake USB SMPS Mobile Chargers that arrived in your city in the last month.