Constellation Performance Centaur II 500 power amplifier | Lrd12 Overload Relay

I’m not claiming this is a new phenomenon (I’ve done some stupid things with electricity myself, before the www was even invented) but we know that the media isn’t always rational about these matters.

The farther I need to travel to get to you, the more time is taken out of my day—and I’ll factor that into your bill. Finding someone closer to your neighborhood might be able to charge you less.

They make silicone pad heaters for automotive stuff like someone else mentioned, that would probably work too.

When the cycling control opens, line voltage is taken away from the motor. The motor’s rotor decreases in speed. Thus, the back-EMF generated across the start winding decreases in magnitude. The relay’s coil now sees a lower back-EMF and no longer can generate enough magnetism in its iron core to keep contacts 1 and 2 open.

I like the idea, but you don’t need a 3D printer for this. Just use conductive strips or good ol’ fashioned wire.

Dust reduction. The Sony A33 has a dust abatement and removal system. A charge-protection coating on the low-pass filter aims to prevent dust adhering in the first place. The sensor shift mechanism used to provide SteadyShot image stabilization also doubles as a shake mechanism to try and free stubborn dust particles that settle on the low-pass filter, although at much lower frequencies than the vibration induced by cameras using a piezoelectric element. From what we can tell, there is no strategy for keeping dust off the translucent mirror, except to blow the surface gently with air; it cannot be cleaned, and should never be touched. A fingerprint would require replacement at a service center.

There are split-phase premises supplies and three-phase. Split-phase is used for residences and small businesses, and three phase is used for larger businesses and some larger multi-tenant buildings. When using two of three phases, they’re 120 degrees apart and the nominal voltage is 208 volts. When using both sides of split-phase, the two are 180 degrees apart and the nominal voltage is 240 volts. The nominal voltage from one phase to neutral is 120 volts.

I’m constantly amazed by the use of a giant blob of solder to increase the cross section of PCB traces meant to increase their current carrying capability.

Regular gasoline costs about $3 per gallon where I live, so it’ll cost (26 / 46 * 3) = $1.70 to propel the Niro the next 26 miles after the battery is depleted.

Path: All Categories >> Electronic Components >> Electromechanical Components >> Switches >> Metal pushbutton switches – Update me on new products View latest products

Waterjet – Eh? Are you on heavy meds/drugs or just plain stupid? What the fsck has the optocoupler to do with the load? It simply triggers the BT137 which is the triac that handled the switching of the load.

By the way, the plug-in Kia Niro appears very similar to the now-discontinued plug-in Ford C-Max. I wish Kia better success with their product offering than Ford had with theirs.