Facebook and Google hit with $8.8 billion in GDPR lawsuits | 19mm Momentary Push Button

The Sony A33 uses the image sensor itself when metering, and considers the overall image as 1,200 separate zones in performing metering calculations. Metering modes include Multi-segment, Center-weighted, and Spot, and the metering system can function from -2 EV to +17 EV (at ISO 100 equivalent with an F1.4 lens). An autoexposure lock button is provided, allowing metering to be locked from a specific portion of the subject, then the overall image reframed as desired. +/-2.0 EV of exposure compensation is available, in 1/3 EV steps. The A33 also offers a three-frame exposure bracketing function, which allows a step size of either 1/3 or 2/3 EV between subsequent frames. Shutter speeds from 1/4,000 to 30 seconds are available, as well as a bulb position that holds the shutter open for as long as the shutter release is pressed. Flash X-sync is at 1/160 second. White balance options include auto, six presets (Daylight, Shade, Cloudy, Incandescent, Fluorescent, and Flash), plus both custom and direct color temperature (2,500 to 9,900K) options. The six presets allow +/- 3 step adjustment, and there’s also a color filter setting that provides +/-9 steps of magenta / green compensation.

I know a lot of people that have never heard about “makers” but I wouldn’t trust them near any mains wiring – like my own dad who has wired a circuit breaker between live and neutral. Only the ensuing BANG and my mom’s swearing and yelling from the now dark kitchen have disabused him of the idea that that is how it should be done.

Power outlets in homes—but not businesses and other buildings—are required to have tamper-resistant receptacles, which prevent kids from getting hurt when sticking objects in the slot. At first glance, the tamper-resistant receptacles don’t look different from the ones without the safety feature, so read the label closely if you need to buy a new one. They’re a little more expensive, but I’ll send you back for another if you don’t shell out the extra money up front.

I don’t know where do you see low voltage traces close to mains voltage. Trace from R8 to the opto is 2.64. How far do you think it should be to meet your standards? Conformal coating is telling you anything?

Before I bring the tools out, I’m going to ask you questions to get an idea of what’s going on and where to look. You might have your theories about what’s wrong and what my questions mean, but don’t give roundabout replies to match those assumptions. Giving me straight answers will save us both time.

Fdx Advisors Inc, which manages about $3.11B and $2.69 billion US Long portfolio, decreased its stake in Dollar Gen Corp New Com (NYSE:DG) by 3,022 shares to 30,873 shares, valued at $3.37 million in 2018Q3, according to the filing. It also reduced its holding in Invesco Ltd Shs (NYSE:IVZ) by 16,189 shares in the quarter, leaving it with 19,801 shares, and cut its stake in Ishares Gold Trust Ishares (IAU).

Knocking over a candle would be an accident. Keeping barrels of petrol in your living room would be negligence. Doing your own mains wiring without the proper qualifications, I dunno which side that falls on. Real accidents can’t be foreseen, but you have to take reasonable precautions.

I will state this categorically: No one should imitate this hack unless they have been properly trained as an electrician. Messing around with line power when you don’t know what you are doing (even if you think you do) is a recipe for death and disaster – literally.

All silly, make graphene in a blender combine it with acrylic paint, then paint it on. Making heated beds is anything but an art form. Or just use graphite.

Zaprodk bitches about the absence of a fuse — which is clearly explained to be located on a separate power entry board.

When using the Sony A33 with a neckstrap and particularly light lens, this might cause it to bump against your body, but with even moderately heavy lenses the camera will turn face-down even though this doesn’t match the strap mount alignment, and this won’t be an issue. A positive side-effect of the EVF positioning is that it makes it easier to keep your nose from smudging the LCD panel. Given the relatively tight eyepoint of the electronic viewfinder, the projection also helps prevent the photographer having to jam the camera to their face to see the entire viewfinder display.

My situation is a good example. I just purchased a new house and unfortunately it does not have a garage. Until I get the garage built in the Spring with a NEMA 14-50 outlet, I’m going to rough it with L1 at 120V/15A.