Facebook and Google hit with $8.8 billion in GDPR lawsuits | 19mm Momentary Push Button

Called the MPSMv2, the core of the project is the ESP8266 module. The dev board itself can support anything with GPIO pins, whether it’s an Arudino, Raspberry Pi, or anything else with those features. Flashing the NodeMCU firmware is pretty much all that needs to be done in order to get the device up and running, and once you get the device connected to your WiFi you’ll be able to control whatever appliances you want.

In the old days, we were always careful to remind readers to purchase a second battery along with their camera, but in recent years, battery life has become much less of a concern than it once was. Not so with the Sony A33, though: Unless you intend it only for light snap-shooting, consider the purchase of a second battery mandatory.

ead of single layer traces covered by the paint, what about multilayer PCB? So the traces would be embedded between two FR4. This way it would be safer.

On Demand Refrigerant Safety Classes A2L and A3 have a very low GWP, making them a strong, long-term solution for many HVACR applications. However, these refrigerants are classified as mildly flammable and highly flammable respectively. This flammability class raises safety and compliance concerns. This webinar will help you understand these classes, along with the opportunities these refrigerants can offer.

I’ve also experienced very similar shocks, mains flowing from one hand to another by trusting my co-worker. I couldn’t move my arms and upper body, couldn’t scream, breathe or even see during the shock. I don’t know how long it lasted and there was nobody nearby. Luckily my brain and lower body was still partially functional and I somehow managed to kick the wall in front of the, to disconnect myself from live connections. Some of my fingertips were smoking. I learned my lesson as well – never trust anyone, especially if they are repeatedly assures you that the power is down.

I use a variety of a/c and dc fostek ssrs. I have yet to have a problem, but i use them in circuits where 50% of their rated current is the absolute maximum they will ever see.

By the way, the plug-in Kia Niro appears very similar to the now-discontinued plug-in Ford C-Max. I wish Kia better success with their product offering than Ford had with theirs.

The crimp terminals I am using are rated for 24A, and I am using a ratcheting crimping tool. I have checked, and therefore I do not believe you.

PCB coatings seal off remaining PCB contaminations and go some way to reducing the presence of future contaminations that may promote water condensation. That is all PCB coatings do! There is no point coating over solder connections as these may be re-soldered in service. Even a coated PCB will have condensing water at very high humidities and favourable temperature differences.

Last year, Sonos announced plans to add support for Apple’s AirPlay 2 to its speakers. AirPlay 2 is a significant feature in that it will allow iPhone and iPad users to send audio from basically any app to Sonos’ great-sounding speakers. And you’ll be able to tell Siri to play tracks from Apple Music on Sonos systems; the Sonos One smart speaker doesn’t currently let you launch music from Apple’s service with voice commands, but AirPlay 2 is a roundabout way of introducing that convenience. The difference is that you’ll be doing the talking to your phone instead of the Sonos.

Yeah just what we need – another dopey ‘standard’. Putting stuff in right and using proper equipment is and has always been the solution.

I’d like to say that if a circuit breaker is X-degrees over ambient, it’s a problem… but there’s just no hard and fast rule for this. I can’t say this.