Google reportedly paid Andy Rubin $90 million after he allegedly coerced sex from employee | Lrd12 Overload Relay

So, you agree with 3mm. Good. A step forward. And because I see you want to use that Industrial standard as example how is your standard looking in case of soldermasked and conformal coated board? What I can say is that I used the 3mm/kV rule and never failed me in 25 years, no board rejected ever…and for the sake of the discution, as you know, when we are under 500V/10A circuits things looks a bit different in PCB Design. We are not sending nobody to the Moon nor switching a 500A Engine starter. It’s a max 300W lighbulb Switch and it’s 99.99% safer than the latest zilions of made in China dimmers and fake USB SMPS Mobile Chargers that arrived in your city in the last month.

The device uses a triac to do the switching, and is optically isolated from mains. Be sure to check out the video after the break to see the device in action. All in all, this could be a great way to get started with home automation, or maybe just do something simple like build a timer for your floor lamp. Anything is possible!

Due to its diminutive stature, most photographers will find that the grip only accommodates two fingers, with the index finger resting on the shutter release button above, and the little finger curling beneath the bottom of the camera. This might seem a little crowded, but with the light, plastic-bodied 18-55mm kit lens, handling is nonetheless good, with the combination feeling extremely well balanced. Using larger, heavier lenses, the grip size is too tiring for single-handed shooting, so the photographer’s left hand will need to serve double duty, adjusting zoom or focus while simultaneously taking up the weight of the lens itself.

Maybe what should be done is a special 240 outlet be developed and installed in all new construction (1 per garage). Something with safety features like thermal monitoring built into outlet. This would probably cost less than all those annoying ARC fault breakers I am required to have…

We were pretty close to that 40% rule when our controllers started to fail, which is probably why they only started failing after our customers had use the controllers a few times. We were pushing 22 Amps through 40 Amp rated parts. In other words, using a component at half its rating still won’t cover for substandard parts! Our solution was to find a part that was manufactured to spec and also use the component at half its rating and we’ve not had a verified SSR related failure since.

This device – and any high-powered device that’s home-built – should be regularly inspected to insure that the wiring is not degrading due to heat caused by increased resistance. That’s why the chassis has a clear lid.

I can’t think of any good reason for a toggle switch to get hot. If I ever found a hot toggle switch, I’d call that a fire hazard and recommend repair.

Hopefully the era when people did industrial sourcing from an overgrown Beanie Baby marketplace will be looked back on by future generations, and they’ll laugh.

Heating is a function of power loss, which varies by the square of the voltage drop and inversely with the resistance. Current is a fallout of the voltage drop across the resistance. While typically stated as I*I*R losses, getting that “I” to be a big number with a low input voltage means that R has to also be low, which decreases power. Requiring a low R for the heating element magnifies the power losses in the rest of the circuit, where heat isn’t desired.

Pedantic FWIW: Afghanistan and North Korea and some banana nations use 110V. USA uses 120V/240V. Japan is the oddball, using 100V. Annoying because you can’t draw more than 1 kilowatt from a socket there (kettle, hair dryer, space heater…). And having lived with the three voltages (100V, 120V, 240V) on four continents, I’ll happily take the 120V supply instead of the 240V.

Similarly in the Senate, Republicans’ slim 51-49 majority means that Flake’s defection could be enough to help sink a nomination, or at the very least trigger a tie-breaker. In the case of Farr, Democrats have mounted an aggressive push to block his nomination. Given Flake’s current stance, if they can convince just one more Republican to switch over, they could successfully take it down.

Then again, like other counterfeit assemblies…. they might rely on the installer using a 25A relay for a 15A load which is why they put a counterfeit 16A triac inside which the manufacturer actually put a die of a 12A because he knows his user will de-rate the max current anyway.