Here’s a sure red flag the home contractor you’re considering is untrustworthy | Lrd12 Overload Relay

Low voltage DC distribution makes sense in some cases. 12V is pretty low, though: copper losses are still high, so the amount of copper required is expensive for house-scale. 48V uses one sixteenth the amount of copper, and still is below the shock hazard limit. 48V rack systems are mature, common and are a great idea.

My first job in the trades was as an electrician’s apprentice doing tasks, such as pulling wire, building light fixtures, and moving scaffolding in grocery store renovations. I moved into HVACR and now serve as an HVACR contractor, instructor, and electrician.

All of this, if you suppose that you are taking a full hand of cable. Got shocked a few times with AC (and DC as well) and since I was just thouching, not handling, I had no trouble to get away with it (just swearing A LOT and throwing my screwdriver through the room).

Dust reduction. The Sony A33 has a dust abatement and removal system. A charge-protection coating on the low-pass filter aims to prevent dust adhering in the first place. The sensor shift mechanism used to provide SteadyShot image stabilization also doubles as a shake mechanism to try and free stubborn dust particles that settle on the low-pass filter, although at much lower frequencies than the vibration induced by cameras using a piezoelectric element. From what we can tell, there is no strategy for keeping dust off the translucent mirror, except to blow the surface gently with air; it cannot be cleaned, and should never be touched. A fingerprint would require replacement at a service center.

It is often a surprise to see how other people react to mains electricity when they encounter it in a piece of equipment. As engineers who have dealt with it both personally and professionally for many years it is easy to forget that not everyone has had that experience. On one hand we wince at those who dive in with no fear of the consequences, on the other we are constantly surprised at the number of people who treat any item with more than a few volts in it as though it was contaminated with radioactive anthrax and are scared to even think about opening it up.

Any third-party trademarks or images shown here are for reference purposes only. We are not authorized to sell any items bearing such trademarks.

Fdx Advisors Inc, which manages about $3.11B and $2.69 billion US Long portfolio, decreased its stake in Dollar Gen Corp New Com (NYSE:DG) by 3,022 shares to 30,873 shares, valued at $3.37 million in 2018Q3, according to the filing. It also reduced its holding in Invesco Ltd Shs (NYSE:IVZ) by 16,189 shares in the quarter, leaving it with 19,801 shares, and cut its stake in Ishares Gold Trust Ishares (IAU).

The potentially game-changing performance of the Sony A33′s EVF overshadows its excellent rear-panel LCD, which is a little unfair: It’s as good an LCD as is found on any other camera, and in at least one sense literally outshines them all. It’s the same widescreen ~920K-dot high-resolution LCD we’ve seen now on a wide range of cameras from a variety of makers, but its implementation on the Sony A33 adds a couple of useful twists. First, of course, it literally twists and rotates, albeit from the bottom of the body, rather than the side. This unfortunately makes it useless for composing self-portraits with the camera mounted on a tripod, but otherwise is quite helpful for getting over-the-head and ground-level shots with ease.

When it comes to celebrating the arrival of 2019, Clark County’s got everything you can think of, plus a little…

But if the power supply isn’t made for the 110-120 volt market, then yes, this can be a legit concern.

​So if I am looking to make the magnet more powerful, other than supplying more current, could I wire the primary and secondary coils of the microwave transformer together in series to get more turns (being mindful to keep the direction the current flows the same in both coils)? My thoughts are that it would increase the resistance a bit from the added wire but that the magnet would have a lot more turns. Am I missing something or am I onto something? Thanks in advance!

It would work, you could try just one winding on its own to start with but beware the voltage surge you get when disconnecting the current, as a minimum it should make a nice spark, even with a small battery driving it, at its worst it is shocking(!) I think the reason for winding your own coils is to get the optimum ampere turns for a chosen voltage, if you use what the transformer comes with you will have to work out what voltage gets you the highest magnetic strength without burning out the winding.