Sure I expect my line voltages to vary especially given that the actual spec for my line voltage (UK) is 230V +10%/-6% – my nominal voltage where I’m sitting is around 242V and I’ve seen it go as high as 252 and as low as 220.
Called the MPSMv2, the core of the project is the ESP8266 module. The dev board itself can support anything with GPIO pins, whether it’s an Arudino, Raspberry Pi, or anything else with those features. Flashing the NodeMCU firmware is pretty much all that needs to be done in order to get the device up and running, and once you get the device connected to your WiFi you’ll be able to control whatever appliances you want.
My grandmother had a set of glass topped buffet serving tables where the glass top had a foil element sandwiched between the glass layers. They plugged right into the wall. No components other than the heating element, line cord, and a neon bulb to remind you it was plugged in. The element terminated with a couple of fused in copper rods threaded to take nuts. Got too hot to comfortably touch, but warm enough to keep your food hot. It should be within the capabilities of a glass/ceramics hobbiest with a kiln to sandwich a foil element between two pieces of glass and fuse the sandwich together.
Yeah, the US connector system is a mess. I just installed a system that’s supposed to use a NEMA 6-20 plug, but the building services people installed a NEMA L6-20 receptacle (locking version). Same electrical specs, but they don’t mate. Back to lopping off the plug and wiring my own g-d connector… Arrgh.
Senate Majority Leader Mitch McConnell has been clear that, aside from any spending bills, Republicans’ priority for the end of the year is to keep pushing judges through — and if Flake holds on this issue, it could throw a wrench into that plan.
Yeah really though. It’s kind of embarrassing. I’m an engineer and work in big industry (usually minerals, bulk material handling, oil and gas, doing a big robotics project right now for a wood products plant, etc.) and this would be an afterthought. No one would even question it. I mean really a no brainer. People use electric blankets on their bed. I really don’t get it. It really shows how amateur hour most of the people who comment on this site are.
inserts probes into amperge socket sets to VAC and measures 120v wall socket meter goes bang and lets blue smoke out
Agreed, this is a house fire waiting to happen and your insurance co. won’t give you a cent if an investigation points to this homecooked thing as the firestarter. There are numerous commercial alternatives which are small enough to fit in a junction box _and_ are UL/FCC/CE approved. Granted, they aren’t as cheap as the ESP module and the triac described here, but in the end, most cheap alternatives to switching powerful currents turn out to be very expensive after all.
Like many things, it’s the few psychopaths who spoil it for the rest. For most people, it’s quite possibly an emotional disability.
High-end professional SLRs drop the mirror between exposures, providing a direct (however brief) view of the subject between shots. In contrast, in their highest-speed capture modes, the Sony A33 and A55 display a static image of the shot they’ve just captured. Rather than seeing interrupted glimpses of your subject in motion, the A55 displays a procession of still images, each lagging the subject motion.
Your friend died of what and why? Testing mains voltage across the back of his hand? Please. Mains voltage is not scary if you know what you are about. I dealt with volts up to 132KV and mega amps and megawatts in my career I worked in the UK electrical power industry.
I use these kinds of SSRS in high current applications driving kilns. we protect ourselves quite happily by having a contactor in the line. The SSR when it fails fails ON and the contactor is help closed all the time but overtemp or any other kind of alarm will release teh contactor and break teh circuit. My recommendation – and no one wil ever get to the bottom of the comments on this feed – is to add a contactor in series which is help closed and opened in an alarm condition. Then the SSR can fail to its heart’s content and you’re good. The SSR is of course much better at switching on and off than the relay which will fail eventually from on/off transients. As usual – YMMV
Microsoft and Razer are working on Xbox keyboard and mouse support | 220v Contactor Relay Related Video:
To meet the customers' over-expected gratification , we have our robust crew to offer our best over-all support which includes marketing, income, coming up with, production, excellent managing, packing, warehousing and logistics for Motor Starters And Contactors , Electrical Contactor , Thermal Overload Contactor , By continuous innovation, we will present you with more valuable items and services, and also make a contribution for the development of the automobile industry at home and abroad. Both domestic and foreign merchants are strongly welcomed to join us to grow together.