Sonos will only bring AirPlay 2 to its recent speakers | Circuit Breaker Parts

I have never seem a ‘cooked’ TRIAC or a TRIAC that is not working properly unless it has exploded.

If you enjoy people photography and delight in taking photos revealing real character and emotion, get yourself a Sony A33 and a large memory card, set the camera to high-speed continuous mode, and let fly. You’ll be amazed at how much more intimate and impactful your photos become.

I think that’s technically just thin graphite. Graphene is 1 molecule thick sheets. People were gobsmacked when they discovered you could make it with sellotape.

Dust particles are often flammable, in high densities this means they’re explosive. https://en.wikipedia.org/wiki/Dust_explosion

My friend died of electrocution while on the job. Our mains voltage here is 240V (single phase) or 415V (three phase) and not very forgiving.

Flake, along with Sens. Chris Coons (D-DE) and Cory Booker (D-NJ), attempted for the second time to schedule a floor vote on the bill protecting Mueller on Wednesday, but it was blocked by Sen. Mike Lee, who argued that the legislation was unconstitutional (a longstanding conservative argument, explained by Vox’s Tara Golshan here). The bill would ensure that Mueller could only be fired by a Senate-confirmed DOJ official and enable the special counsel to review any firing.

On Demand Refrigerant Safety Classes A2L and A3 have a very low GWP, making them a strong, long-term solution for many HVACR applications. However, these refrigerants are classified as mildly flammable and highly flammable respectively. This flammability class raises safety and compliance concerns. This webinar will help you understand these classes, along with the opportunities these refrigerants can offer.

• Calculate how much power you need: Generators are sized based on the power they provide an average home. Go through your home and identify the lights, electronics and appliances you want to run and the watts they consume. That’s simple enough to figure out with lamp or light fixture that takes a 60-watt bulb, and tougher to determine with your refrigerator. Aiello says to look for the data plate found on most appliances. It should tell you the volts and amps. Then do the math: Volts multiplied by amps equals watts. Or go online and look up the specs. Generac also has an online portable-generator sizing calculator you can use as a guide.

3-phase installations like industrial facilities and some apartments are fed with 208V 3-phase, which provide three phases of 120V to neutral, or 208V phase-to-phase.

The dimmer switch for the kitchen lights was rated for up to 600 watts, but the wattage at the lights was more than this; there were ten 65-watt bulbs on this circuit. This caused the front of the switch to get extremely hot, and creates a potential fire hazard. Have this corrected.

I suppose the other point of note is that compared to 220/230/240 Euro voltages, residential 240 is not 240 to ground. The only things that have such high voltages to ground are either corner-grounded 240 deltas (which are exceedingly rare) and 480/277Y systems (which admittedly I do a lot of work with). I also really like how in the US we have such an extensive system of completely non-interchangeable, unique connectors for all the different voltage and phase combinations that one might find (thanks, Harvey Hubbell!)

Look and feel. Although it lacks the reflex mirror of an SLR, having replaced it with a fixed translucent mirror, the basic shape of the Sony SLT-A33 still follows that of a traditional SLR fairly closely. That’s because, since it accepts the same Alpha lenses as Sony’s DSLRs, the Sony A33 also has to accommodate the same backfocus distance, which is one of the main contributors to the size — and especially, the depth — of an SLR camera. Removing the reflex mirror still provides potential for space and weight savings, and Sony has taken good advantage of this. Most obviously, the drive mechanism that raises and lowers the reflex mirror in a traditional SLR isn’t needed. The translucent mirror design also provides other opportunities to optimize component placement. As one example of this, Sony has increased the angle of the translucent mirror, so that instead of directing light directly upward at a 90 degree angle as it would for a viewfinder prism, it is actually angled upward and slightly forward, allowing the autofocus sensor to be moved forward, providing more room for the electronic viewfinder assembly directly to the rear.