This robot uses AI to find Waldo, thereby ruining Where’s Waldo | Circuit Breaker Parts

Rather than rest after establishing products in every major sector of the interchangeable lens digital camera market — APS-C SLR, full-frame SLR, and most recently single-lens direct view — Sony is boldly striking out to create yet another category with the launch of its very first translucent mirror cameras. The main goal of the new design: achieving unprecedented autofocus and capture speed from an APS-C sensor, interchangeable-lens, consumer digital camera. Comprising a new SLT series, the Sony Alpha SLT-A33, A55, and A55V are closely related cameras sharing the same basic design, with only a few internal features as major differences.

I was looking for a high power capable latching type to stop my old car from draining its battery… Came across this.

I can’t speak for 75 mph, but the EPA for the regular hybrid Niro is high 40s to 50 mpg highway. Since this car uses the same Atkinson cycle 1.6L engine, I’d expect about the same fuel economy.

My own maxim is that just because something can be – and perhaps often is – done poorly or hazardously does not at all preclude any possibility that it can be done properly and safely.

Turn off the power at the main box to the A/C unit and open the electrical access panel on the air conditioner. It is usually located where the electrical power comes into the unit. Check for rodent nests and wires that have been chewed or frayed.

You did reply to the Gurubuckaroo comment, just a few interjections managed to find their way in first. Does mess up smartarsed replies occasionally, shame when it’s a particularly funny one. On busy articles, I often find posts popping up between pressing “reply” and “post comment”.

This time, though, he says he’ll only change course once the Senate votes on a binding bill. Now, it’s up to McConnell.

Thanks for letting me know about the typo and qualifier on the 208V part. I’ve updated it in the article.

The customer changed their tune. My boss was impressed (though not enough to give me some coinage for ingenuity) and the electrician was told to change the breakers and add the new feeders to support the load. Got a lot of recommendations from that customer in the years after that.

As far as litigation goes? I know enough about Chinese law to know that it’s really up to Fotek and whether Fotek applied for trademarks in China or not, and whether they did the rest of the intellectual property legwork in China (which is really tricky because China doesn’t use common law like Western countries do, so it’s a harder system to navigate). If they did, then yea, the counterfeiters could probably be sued although it’s a whack-a-mole game, the counterfeiters come up faster than they can be whacked down. But if Fotek didn’t go through the China IP process to protect their brand, then the counterfeiters may have actually applied for the trademark themselves in China, gotten the right to use the name, took the likeness and everything, legally (at least in China). Best Fotek could do at that point is try to keep them from being imported into the USA (similar to the Sparkfun fluke-colored DMM’s a few years back) but again that’s a whack-a-mole game that they wouldn’t win.

It’s the same with larger, more power hungry projects as well. [Nerd Ralph] has been running a mining rig for a few years now, and has learned just how important proper power supply management can be. His strategy involves using interlocks to ensure everything powers up at the same time to avoid feedback problems, running a separate ground wire between all GPU cards and the PSU and running the supplies at 220 for the NA folks.

Tilt level. The Sony A33 includes a dual-axis level gauge, which helps ensure level horizons and prevent converging verticals in photos. The level gauge can be shown on either the electronic viewfinder or the rear-panel LCD, but only alongside the most basic information overlay — you can’t combine the detailed display overlays with the level gauge. A clever way around it, though, is to set one viewer to the level gauge, and the other to a more informative display, since by default you can set the display modes independently. There’s no way for the user to recalibrate the gauge, if they find the factory default to be inaccurate. The gauge is displayed in a style reminiscent of an aircraft attitude indicator, but with a separation of the roll and pitch indicators. When the camera is perfectly level, the pitch indicators and markings at the end of the roll indicator are illuminated in green.