VLC is blacklisting recent Huawei devices to combat negative app reviews | 25 Amp Circuit Breaker

This isn’t the first occasion that Flake has threatened to withhold his support for judicial nominees. He did something similar before to prompt consideration of a measure on tariffs, though he ultimately relented after the Senate voted on a purely symbolic effort.

I know a lot of people that have never heard about “makers” but I wouldn’t trust them near any mains wiring – like my own dad who has wired a circuit breaker between live and neutral. Only the ensuing BANG and my mom’s swearing and yelling from the now dark kitchen have disabused him of the idea that that is how it should be done.

Some adjustment necessary. This shot turned out well at -0.3 EV, but a lot of my shots under bright conditions could really have used -0.7 EV of adjustment.

When I’m doing electrical work, I *always* short the conductors to verify no power (after flipping the breaker and testing with a meter). Better safe than sorry.

Jerry is Mobile Nation’s resident nerd and proud of it. There’s nothing he can’t take apart, but many things he can’t reassemble. You’ll find him across the Mobile Nations network and you can hit him up on Twitter if you want to say hey.

My first thought was that the terminals were over torqued rotating the blocks, stretching the pins, and tearing the pads.

I am certainly not suggesting HVACR techs engage in performing work outside of their skills or licensures, but, in many cases, being able to identify the problem and making the repair are two different things.

But 110/120v A/C? that stuff is baby-play, as long as you realize that you shouldn’t use both hands, or use grounding straps, it just kinda buzzes, I’ve played around with TENS devices that had more (felt) kick than it…

In the waning days of Flake’s presence in the Senate, the Arizona lawmaker, who’s frequently clashed with Trump, now has dwindling opportunities to make his mark. Longtime observers of his tortured reluctance to back Republicans going in a direction he does not like will recall that such stands often end with Flake simply, well, flaking.

I think the only conceivable danger to using relays would be that they could weld themselves shut. But in this case, the relay contacts are rated for 30A and I’d not be likely to exceed even half that. The only other failure modes of relays are safe (the relay failing to close, for example).

When choosing an appropriate MOV for a specific overvoltage-protection application, the circuit designer must first determine the operating parameters of the circuit being protected, including:

Yes you can use those high voltage safely, BUT your typical DIY people don’t even bother to read or understand datasheets. These people need the proper training, but aren’t likely to be bother to go beyond the typical monkey see monkey do watching youtube and think they know it all. I have seen enough of bad layouts of the average projects that doesn’t even understand that the creepage space between the primary and secondary side of an optoisolator aren’t meant to be for routing!